.png){kind=logo}
- CLEANING CHEMICAL
- CLEANING EQUIPMENT
- HYGIENE PAPER
- TOOLS & ACCESSORIES
- ICE
- RUBBERMAID
- BROOMS & BRUSHES
- CARPET BONNETS
- CLEANING AND HOUSEKEEPING CARTS
- CLEANING CARTS
- CLEANING TOOLS
- DUST MOP FRAMES AND HANDLES
- DUST MOPS
- DUST PANS
- DUSTING TOOLS
- LAUNDRY NETS
- MECHANICAL SWEEPERS
- MICROFIBER
- MOPPING EQUIPMENT
- ORGANIZATIONAL TOOLS
- SQUEEGEES
- STEP STOOLS
- WET MOP HANDLES AND ACCESSORIES
- WET MOPS
- OTHERS
- FLOOR MATS
- RECEPTACLE BINS
- SAFETY PRODUCTS
- WASHROOM SOLUTION
- STONE CARE SOLUTIONS
- NATURAL AIR PURIFIER
TOP PROGRESS SUPPLIES
SDN. BHD.
No. 27, Jalan Kelisa Emas, Taman Kelisa Emas, 13700 Perai, Penang, Malaysia.
+604-397 7221
+604-399 9221
Kuala Lumpur Branch
Lot No. 15, Jalan TIB 1/2, Taman Industri Bolton, 68100 Batu Caves, Selangor, Malaysia.
+603-6186 8511
+603-6188 8511
+603-6188 8511
+603-6188 8500
GIALOTEX 每 Shining powder
| Previous | 5 / 6 | Next |
GIALOTEX – Shining powder for natural marble floors is suitable for any kind of marble surface, leaving an impressive and natural “mirror-shine” finish on coloured marbles and limestones such as the beiges, reds or black ones.
Use
The surface has to be clean and dry. Do not dilute or mix with other products. Pour a little quantity of the product (approx. 20gr.x sq.mt.) Over an area of about 2 sq.m. And add a little of water. Buff with the polishing machine fitted with a white pad and spread the paste over all the area to be treated. Gloss will appear while the paste is dissolved by buffing. If the mixture is getting dry, add a little of water to dissolve the product again. If the mixture is too liquid, use the other side of disc and buff again the surface, drying the liquid excess. Once the surface is dry and shinny, vacuum it and rinse with clean water.
Use
The surface has to be clean and dry. Do not dilute or mix with other products. Pour a little quantity of the product (approx. 20gr.x sq.mt.) Over an area of about 2 sq.m. And add a little of water. Buff with the polishing machine fitted with a white pad and spread the paste over all the area to be treated. Gloss will appear while the paste is dissolved by buffing. If the mixture is getting dry, add a little of water to dissolve the product again. If the mixture is too liquid, use the other side of disc and buff again the surface, drying the liquid excess. Once the surface is dry and shinny, vacuum it and rinse with clean water.